Okuma OPS 7000m control

[Rick Henrickson 65]

Oh are you running a scheduled program?

[Rick Henrickson 65]

you do not have to use the variables to run a program it is just a safety line to make sure you do not start with the wrong tool in the spindle.

[connormac]

Don't know about scheduled program.

I think the machine is going on the blitz. Had to put #11 on 3 to read the program now it is hit or miss on whether it will bring it in out of the buffer. Or seq. name is not designated alarm #2223 -1 or seq. name is not found alarm# 2223-2.

 

is it beer-thirty somewhere

[Rick Henrickson 65]

you would know if you were running scheduled. what method is number 3? it should tell you at the bottom of the dispaly when you are in auto

[Rick Henrickson 65]

Another thing i just noticed

 

--------------------

NA10 IF[VATOL EQ 1 ] NB10

T1 M6

T2

G15 H1

NB10 G0 X2.7257 Y2.1296

-------------------

you should put your G15 H in the NB10 line

if the statement is true it will skip your work coordinate G15 H1

[Rick Henrickson 65]

G0 G40 G53 G80 G90 Z100.

N100 (2.5 3 OR 5 FL. FACEMILL)

IF[ VATOL EQ 1. ] N110

IF[ VNTOL EQ 1. ] N105

M64

T1

N105 M6

N110 G0 G90 G15 H1 X-1.575 Y-1.7805 S4000 M3

G56 H1 Z1.

G71 Z1.

/ T2 M8

(1ST OP FACE Z0.)

--------------------

This is how our code looks

[connormac]

Rick Iwill check that. The only way to get this 1 program to run is take out all the

NA10 IF[VATOL EQ 1 ] NB10

NB10

and just end up with

 

T1M6

T2

 

I just need to put something in there to clear out last call up. If T1 is already in spindle it gives me an alarm. I know that is what all the VATOL EQ 1 is but for some reason I can't have them in this program and get it to read.

[connormac]

Rick,

What does your post look like to put in

 

IF[ VATOL EQ 1. ] N110

IF[ VNTOL EQ 1. ] N105

 

That will get rid of my overage problem

[connormac]

Just talked to Okuma and they said that going to line numbers is what I need to do instead of seq. names.

[Rick Henrickson 65]

Did you try that?

So it was the NA and NB that were giving you troubles?

[connormac]

Yes I need to put in line numbers in like you have so I need to put them in like you have.

[connormac]

I figured it out. Will wonders never cease!!

 

Thank all of ya'll for your help.

 

Rick I got it to come out just like your code.

[Rick Henrickson 65]

Great, have a good day. Sorry we didnt figure it out quicker

[?Mark]

I'd stay away from any control with "oooops..." in it's name

j/k