generic Haas 4 axis vmc mm post help

[Tony35]

quote:

---

I still don't understand why the MD doesn't work?

---

look for this in the post

pbld,n$,where is my 3 nailz CD

i think the post is still driving some of this "pfcout" force c out

 

glad you got it working

[Josh T™]

JP gave some great insight on getting it to work without removing the outputs. Thanks again JP

 

 

In regards to the 3 Nailz CDs....

There has been an issue with my former band members on copyrights that we still have not resolved. I personally composed and wrote 9 out of the 10 songs on the album but one guy doesn't feel like I should get any royalties from radio play. We are working it out if 1 jacka$$ can get his heart right. I haven't forgotten about you guys!

[Tony35]

quote:

---

I removed the pfcout and the protretinc and it works great.

---

ok so if you didnt remove them how did you get it to work?

 

sorry to hear about the 3nailz thing i was just "joshin" wit ya good luck and hope it all works out for you

[Josh T™]

Set all of the user variables for rotary settings (depending on the post they may be scattered around) to "0" even is the call for 1,2,3,etc.

[Min Xu]

Josh, as Paul said, you need to uncheck the A axis in the 'Machine Axis Combinations' dialog, NOT in the 'Machine Definition Manager' dialog. If you click on the Axis Combination icon on the top tool bar in 'Machine Definition Manager' dialog, you will see 'Machine Axis Combinations' dialog pops up.

[Sbarner]

FWIW, I added some code to my post so that I never have to touch the machine/control def. If no rotary is used, the post will not output the A0. If it is used, then I will see the A move. It works well.

[Sbarner]

FWIW, I added some code to my post so that I never have to touch the machine/control def. If no rotary is used, the post will not output the A0. If it is used, then I will see the A move. It works well.

[Josh T™]

Care to post your changes Steve? I'm interested and I'm sure others are also.