MORI SL-35 - bar puller question

[Dave Perron]

Hello everyone, we have a mori seiki SL-35 lathe with a fanuc 15 control. The operator wants to use a bar puller to pull a square pc of stk. He is having trouble getting the spindle to orientate correctly to the bar puller - because the part is square. Is there a way to adjust the rotation position of the spindle when M19 ( spindle orientation) is used? Thank you for your help.

[Tony35]

i think its a parameter that can be adjusted for degrees of orientation

 

this may help ya

FANUC MANUALS LINKY

 

HTH

[Kyle Waters]

dperron,

You should be able to manually align the stock, then command the same angle in your bar puller routine.