M11 AND M10'S

[Slixmix]

I just noticed that when I have a horizontal program that does only one face, it does not output the M11 and M10 before my B moves. It works fine on my programs for multiple faces. Is this an easy edit to my post? Mastercam X5 on a Mori Seiki NH-4000. TIA!

[K2csq7]

Whats kind of post Slix?

[MIL-TFP-41]

If its an MPMASTER post this is normal behavior.

 

Look for this line in the PWRTT section

 if vmc = 0, sav_rot_on_x = rot_on_x	#Uncomment this line to output rotary axis value even when it's not used

[Slixmix]

Worked great! Thanks guys.

[MIL-TFP-41]

I forgot to add that at the first of the line on my post "if vmc = 0" is NOT there on the original MPMASTER. I added it there because we use the same post for many different machines, both horizontal & vertical. The horizontals I want this posted out 100% of the time....verticals only when it is used.

 

Glad it worked for you.