Matsuura w/ a Renishaw NC4 laser

[MIL-TFP-41]

Ok, we have 3 machines with an NC4 laser (MAM72-63V, H-plus 630 & a H-Plus 405)

Long ago when we got the MAM, it came with a tool setting macro, O9303. Works great, you can do sequential tools all in one program line. I modified this macro when we got the 630. Once again, it works great. Now I finally got a few minutes to put it on the 405. No worky. It hangs up on this line.....

IF[#1003EQ1]GOTO75

Note...that is from the MAM. When I modified it for the 630, I changed it to this...

IF[#1000EQ1]GOTO75

 

So what I believe is happening that line looks to see if the laser is broken...if it is then #1003 = 1 then the program skips to N75 and things go on like they should. Now when we got the 630 somehow I figured out that Matsuura changed some logic SOMEWHERE and decided to make #1000 the variable to see if the laser is broken. Now comes the 405....I have found that its neither #1000 or #1003. Sooooo...the question is....how do I figure out what it has been changed to? How did I figure it out before? WTF didn't I make of note of how I figured it out?

 

Thanks!

 

[edit] all have 30i controllers [/edit]

O9303.zip

[Tim Johnson]

Unless Matsuura provides a variable list in one of it's manuals you'll probably have to call your supplier.

[Guest]

Yeah, I'd call Minneapolis to find out what they changed the variable to. They shoudl be able to tell you. You'll need to give them the machine serial number though.